Wilson 8M Project; Deck, Coamings and Cabin tops.
Mould surfaces:
- Customwood
- Epoxy Glue
- Epoxy Filler
- Duratech surface coating (Polyester resin based product)
- Mould release wax TR108?
- PVA release film
- Temporary fasteners
- plastercene
Product (Moulding):
- Peel ply
- ADR246 Epoxy Laminating Resin with ADH28 slow Epoxy Hardener
- 210g/m2 e-glass Boatcloth (inside skin laminate)
- 430g/m2 e-glass Double Bias structural cloth (inner laminate)
- 15mm 100kg/m3 PVC closed cell foam core (Airex)
- 14mm timber core inserts for localised high load (fastener) areas
- Microsphere filler to fill voids
- 430g/m2 e-glass Double Bias structural cloth (outer laminate)
- 210g/m2 e-glass Boatcloth (outer extra abrasive barrier laminate)
- Microsphere filler for final fairing
- High build undercoat system (epoxy based paint system)
- peel ply
- perforated plastic media
- bleeder cloth
- Vacuum tape
- Vacuum bag film
- Vacuum frogs